TRANSLAMATIC 350 – 100 2018-04-11T15:50:31+02:00

TRANSLAMATIC 350 – 100

Contatact

TRANSLAMATIC 350 – 100

The TRANSLAMATIC ® 350 is a translating logic controller driven by “Charlie” multi-programme computerized controls: First and Executive, onboard integral to the structure or offset housing.

The TRANSLAMATIC ® 350, specially designed to work in the direction of the rails, performs repair and reloading of irregularities of the rolling surface: collapses of the ends, punching, ball hardness testing, ballast prints and slide marks.

Its operational work surface is 100 mm width X and 350 mm in length Y.

Its compactness, its light weight and ergonomics allow easy use:

  • Installation and performance of work by an operator by its composite principle, its modularity and multiple-position loop handle.
  • Aligning, holding and movement on the rail guided and supported by two wheels in tandem
  • Compatibility with universal torch support and with PGA and Roll N’ Roll 0515.

TRANSLAMATIC 400 – 350

The TRANSLAMATIC ® 400 – 350 is an automatic welding machine that finds its use on railway jobs for small repairs on the track in situ.

The TRANSLAMATIC ® 400 – 350, specially designed to work in the direction of the rails, performs repair and reloading of irregularities of the rolling surface: indenting, ball hardness testing, small ballast prints and slide marks, and minor work of track devices, points and wing rails.

The operational work surface covered by the TRANSLAMATIC ® 400 – 350 is characterized by:

  • in length X: an adjustable movement up to 400 mm;
  • in width Y: an adjustable movement up to 350 mm.

The control of movements X and Y used separately or combined allows the performing of multiple figures of reloading.

TRANSLAMATIC 900 – 350

The TRANSLAMATIC ® 900 – 350 is an automatic welding machine that finds its use on railway jobs for repairs on the track in situ.

The TRANSLAMATIC ® 900 – 350 allows automatic recharging by electric arc of faults and wear:

  • surface recharging (skid marks, ball hardness testing, ballast, etc.);
  • the recharging of ends;
  • the recharging of track devices, points and wing rails.

The operational work surface covered by the TRANSLAMATIC ® 900 – 350 is characterized by:

  • in length X: an adjustable movement up to 900 mm;
  • in width Y: an adjustable movement up to 350 mm.

The control of movements X and Y used separately or combined allows the performing of multiple figures of reloading.

Project Gallery